Showing Tue 17 Nov 2026 Back to today

Vaud Alps

Bex-Villars

Tue 17 Nov

Avalanche Problems

Considerable (3-), lower end of the band Dry avalanches · all day
Dry snow level 3 Wind slab + Persistent weak layers 3-
All but S, SW, W above 2,600 m
As a consequence of new snow and a strong to storm force westerly wind, sometimes avalanche prone wind slabs will form. The new snow and wind slabs are lying on top of a weakly bonded Snow layers deposited from earlier precipitation, prior to fresh fallen snow. Old snow layers consist of metamorphosed snow crystals.EAWS glossary in particular on steep shady slopes above approximately 2600 m. Avalanches can be released by a single winter sport participant. Mostly they are medium-sized. Backcountry touring calls for experience in the assessment of avalanche danger.
Field notes

Wind slab

Look for fresh snow deposits on Slope facing downwind/ wind sheltered aspect. Snow deposits can attain several times average snow depth.EAWS glossary, in Usually a steep, elongated, eroded trench; typically prone to snowdrift accumulation.EAWS glossary and Rounded or elongated concavity; typically tending to accumulate snowdrift.EAWS glossary, and behind ridgelines and abrupt changes in terrain — these are where the wind has loaded the snow into slabs that are easy to trigger. Recent avalanches, shooting cracks under your weight, and Distinctive noise (resembling a “whumpf” sound) occurring when a weak layer beneath a slab collapses. The air of the weak layer is forced outside the snowpack, with the resulting whumpf sound being heard. The sound usually indicates an unstable situation and can be accompanied by surface cracking. A whumpf is a clear avalanche alert.EAWS glossary sounds are clear confirmations of the problem. The safest move is to avoid wind-loaded terrain entirely. NB wind signs alone don't always mean an avalanche problem exists, and the age of drifted snow is hard to judge.

Persistent weak layers

Persistent Snowpack layer in which the crystals are poorly bonded and the layer has the potential to fail. Typical crystals in dry weak layers causing avalanches are : precipitation particles; surface hoar; faceted crystals; hollow crystals; graupel. Generally >1mm in size, loose grains with few bonds Wet weak layers can be formed by all snow crystal/grain types.EAWS glossary are very challenging to recognise. Distinctive noise (resembling a “whumpf” sound) occurring when a weak layer beneath a slab collapses. The air of the weak layer is forced outside the snowpack, with the resulting whumpf sound being heard. The sound usually indicates an unstable situation and can be accompanied by surface cracking. A whumpf is a clear avalanche alert.EAWS glossary sounds and shooting cracks are typical when present, but you can have a serious weak layer with no warning signs at the surface. Knowledge of how the Snow deposited on the ground in a multiplicity of layers.EAWS glossary has evolved is essential. SLF's travel advice is direct: travel conservatively, avoid terrain where the consequences of being caught are large, and treat the history of weather and snow as more important than what you can see today. Read the full bulletin.

Source: SLF Avalanche Bulletin Interpretation Guide

Moderate (2) Wet-snow avalanches · all day
Wet snow level 2 Wet snow 2
All but SE, S, SW below 2,600 m
As a consequence of the rain moist small and medium sized avalanches are possible.
Field notes

Rolling snowballs, deep penetration when you step or ski, and small natural slides are clear signals that the Snow deposited on the ground in a multiplicity of layers.EAWS glossary is losing strength. After a clear, cold night the surface often freezes into a strong supporting Layer of hard-compacted snow resulting from a melt-freeze process or wind.EAWS glossary, and conditions are favourable in the early morning. After a warm, overcast night, the problem may be present from the start of the day. Plan early returns and watch the runout zones below you.

Source: SLF Avalanche Bulletin Interpretation Guide

Snowpack & Weather

Snowpack
The snow depths are average for the time of year. Above approximately 2800 m there is 50 to 80 cm of snow. New and wind-drifted snow is being deposited on an Snow layers deposited from earlier precipitation, prior to fresh fallen snow. Old snow layers consist of metamorphosed snow crystals.EAWS glossary that contains Snowpack layer in which the crystals are poorly bonded and the layer has the potential to fail. Typical crystals in dry weak layers causing avalanches are : precipitation particles; surface hoar; faceted crystals; hollow crystals; graupel. Generally >1mm in size, loose grains with few bonds Wet weak layers can be formed by all snow crystal/grain types.EAWS glossary on high-altitude shady slopes. In some places avalanches can also be triggered in these deeper layers. Below approximately 2600 m, the snow depths are still relatively low, so that despite rain only small and medium-sized wet avalanches are to be expected.
Weather Review 15.11.
  • Snowfall limit: 1430m-1940m
  • Temperature at 2000 m: 3.4°C
  • Fresh snow at 1500 m: 0cm
  • Fresh snow at 2500 m: 2cm
  • Wind speed: 26km/h
  • Wind direction: S

Weather Review 16.11.

  • Snowfall limit: 1500m-1930m
  • Temperature at 2000 m: 3.6°C
  • Fresh snow at 1500 m: 0cm
  • Fresh snow at 2500 m: 5cm
  • Wind speed: 34km/h
  • Wind direction: SW
Weather forecast 17.11.
  • Snowfall limit: 1630m-2620m
  • Temperature at 2000 m: 7.4°C
  • Fresh snow at 1500 m: 0cm
  • Fresh snow at 2500 m: 0cm
  • Wind speed: 39km/h
  • Wind direction: SW
Outlook
The danger of dry avalanches will increase. Even single winter sport participants can release avalanches in many places. These can also be triggered in deeper layers and reach dangerously large size. Natural avalanches are possible. The conditions are critical for backcountry touring and other off-piste activities.

Source

SLF

Issued

16 Nov 16:00 UTC

Valid until

17 Nov 16:00 UTC

Next update

17 Nov 16:00 UTC

See this region on the map